Dashboard
---------

The Level State section in the dashboard provide a quick view of the trailer level state. The dashboard does not show how much the 
trailer is out of level, only that it is uncalibrated, level, or not level. 

.. list-table::
   :widths: 33 33 33
   :header-rows: 0

   * -

        .. figure:: /images/application.dashboard.uncalibrated.png
           :align: center

           **Uncalibrated Level State** 

     -
        .. figure:: /images/application.dashboard.level.state.mixed.png
           :align: center

           **Calibrated Level State** 

     -  
        .. figure:: /images/application.dashboard.level.green.png
           :align: center 

           **Calibrated Level State**

To get additional detail on the trailer level state tap on the right arrow in the Level State header.


Level State
+++++++++++

Once you selected the trailer to connect, the application launches the dashboard. |MODULENAME| displays a snapshot of all the sensors, 
such as trailer level state, internal sensors (Pro Only) , external sensors (Pro Only), EMS Status (Pro Only) and Events. The top of the dashboard 
contains a back arrow that disconnects your from your current trailer profile takes you back to the list of trailers. The three vertical dots on the top 
right will popup the main menu. You can tap on the popup menu any time you need access to general settings, trailer settings, ems settings etc.

.. list-table::
   :widths: 50 50
   :header-rows: 0
   :align: center
   :width: 100 %

   * -

        .. figure:: /images/application.dashboard.ems.power.png
           :align: center 
           :scale: 50%

           Dashboard
     -
        .. figure:: /images/application.dashboard.menu.png
           :align: center 
           :scale: 50%

           Popup Menu


.. internal sensors - temperature and humidity

.. include:: mobile.application.internal.sensors.rst


Event Status
++++++++++++

At the bottom of the dashboard is the event summary. |MODULENAME| classifies the events in to Log, Attention, Trouble and Critical. 
The dashboard includes the event counts for each of the event type. 

        .. figure:: /images/application.dashboard.event.tab.jpg
           :align: center 
           :scale: 100%
           

When clicking on the event type (green,yellow,red or black) button, |MODULENAME| will take you the event summary screen and automatically 
filter the events for the type you tapped on. For example if you tap on the Attention (yellow) you would taken to the events summary 
screen and be shown a single Attention Event. Choosing to tap on the arrow to the right of Event Log takes you to the event summary 
page will display all the events currently on the system.

EMS Summary
+++++++++++

.. list-table::
   :widths: 50 50
   :header-rows: 0
   :align: center
   :width: 100 %

   * -

        .. figure:: /images/application.dashboard.section.ems.power.off.png
           :align: center 
           :scale: 100%

           **EMS** - No Shore Power Detected
     -    

        .. figure:: /images/application.dashboard.section.ems.power.on.png
           :align: center 
           :scale: 100%

           **EMS** - Shore Power Detected
 
**Voltage (AC)** 

.. list-table::
   :widths: 5 95
   :header-rows: 1
   :align: center
   :width: 100 %

   * - Icon
     - Description
   * - 
        .. figure:: /images/severityGray10x15.png
           :align: center 
     - No Shore Power
   * - 
        .. figure:: /images/severityGreen10x15.png
           :align: center 
     
     - Voltage to Pedestal and the voltage is between 114 and 126 VAC
   * - 
        .. figure:: /images/severityYellow10x15.png
           :align: center 
     
     - Voltage is between 104 VAC and 114 VAC or voltage is between 126 VAC and 132 VAC
   * - 
        .. figure:: /images/severityRed10x15.png
           :align: center 
     
     - Voltage to Pedestal but the voltage is lower than 104 VAC or greater than 132 VAC

.. admonition:: Note

   In North America the standard is ± 5 % from the nominal 120 VAC.  That puts the acceptable voltage range between 114 and 126 VAC.  |PI| 
   considers anything from 104 VAC to 132 VAC acceptable. See Page 7 of the Progressive Industries manual for more information 
   on voltage ranges).


**Current (ACI)** 

.. list-table::
   :widths: 5 10 42 43
   :header-rows: 1
   :align: center
   :width: 100 %

   * - Icon
     - Load %
     - |EMS30| (AMPS)
     - |EMS50| (AMPS)
   * - 
        .. figure:: /images/severityGray10x15.png
           :align: center 
     
     - 0
     - ---
     - ---
   * - 
        .. figure:: /images/severityGreen10x15.png
           :align: center 
     
     - 0.1 - 50
     - Less than 15 AMPS
     - Less than 25 AMPS
   * - 
        .. figure:: /images/severityYellow10x15.png
           :align: center 
     
     - 50.1 - 75
     - Between 15.1 and 22 AMPS
     - Between 25.1 and 36 AMPS
   * - 
        .. figure:: /images/severityOrange10x15.png
           :align: center 
     
     - 75.1 - 90
     - Between 22.1 and 27 AMPS
     - Between 36.1 and 45 AMPS
   * - 
        .. figure:: /images/severityRed10x15.png
           :align: center 
     
     - 90.1 - 100
     - Between 27.1 and 30 AMPS
     - Between 45.1 and 50 AMPS

.. admonition:: Note
    
   The color ranges for the load current are a function of the |MODULENAME| Pro application and not of the Progressive Industries EMS. 

.. include:: mobile.application.dashboard.levelling.state.rst


.. _hitch height:


.. include:: mobile.application.dashboard.hitch.height.rst

.. include:: mobile.application.dashboard.trailer.tilt.rst

..
 .. include:: mobile.application.dashboard.parked.rst
 
.. include:: mobile.application.dashboard.motion.rst

.. include:: mobile.application.general.settings.rst


.. include:: mobile.application.dashboard.trailer.settings.rst
.. include:: mobile.application.dashboard.units.rst

.. Real Time Clock Section
.. include:: mobile.application.dashboard.rtc.rst

.. Trailer Location Feature
 .. include:: mobile.application.dashboard.trailer.location.rst

.. Trailer Location Feature
 .. include:: mobile.application.dashboard.ems.config.rst